Pendant Test Torch Button Not Working

Perfect! Yes, unfortunately that's a hard wall with the FluidNC firmware. I've personally done extensive work on our FluidNC fork to make it as good as possible but it's just a hard limit while streaming Gcode over a fixed-baud and by nature, shuttle jogging has to be broken down into little pieces with accel/deccel ramps pre-planned on GcodePilots side which the firmware really hates. However, JetFlight is the solution to this problem and the V2 boards just passed final inspection after fabrication and assembly so they'll be on the way soon to test with. I made one small mistake on V1 but was still able to validate everything except AVTHC operation and I'm pretty sure V2 will be ready to go. JetFlight plans all motion on the host machine (regardless of OS and no real-time kernel constraints). The JetFlight V2 plugs right into your existing StrikeCommand Board in place of the existing board and you drop the USB connection and connect via Ethernet