Learn/Waterjet/Machine & Setup
Machine, Media & Cut Charts
At a glance
- Choose Water Only or create reusable abrasives with a name, type and optional mesh.
- Enter your machine’s kerf, feed and valve timing for each stock material and thickness.
- Select one media per sheet and use Best or Production feed.
- Duplicate a chart with its cutting rules to create a new recipe.
- In Edit → Machines, select your Waterjet machine. Choose Fixed-height XY for a machine with manually set height, or Programmed Z to use cut and clearance heights from your chart.
- Open Cut Charts. Use Abrasive Media to record the media you keep on hand, then choose Add Cut Chart. Enter the stock material, thickness, kerf, Best feed, and dwell times. Add a Production feed if you use a separate production setting.
- In the sheet panel, choose the media, material, thickness, chart, and quality. Give each media its own sheet and posted file.
To make a variant of a chart you already use, select it and choose Duplicate. Rename the copy, adjust the thickness, media or cutting settings, and choose Save. The copy includes its own cutting rules. Sheets using the original keep their selected chart.
The chart library starts empty. Enter values you have established for your machine, nozzle, material and media. A chart can also record water pressure, orifice diameter, mixing tube diameter and abrasive flow. Pressure and flow can be sent through the post when your controller implements the configured commands.
Continue with Sheet Layout, Toolpaths & Quotes.