Learn/Waterjet/Toolpaths & Posting

Sheet Layout, Toolpaths & Quotes

At a glance

  • Bring parts in from a file, Drafting, or Design and set the stock for each sheet.
  • Place parts by hand or use Auto-Nest. Lock or unlock parts across the job from the Sheets heading.
  • Generate kerf-compensated toolpaths and inspect the cutting sequence in Simulation.
  • Quote cutting time and estimate abrasive usage and cost by weight.

Set up the sheet

Bring in profiles with From File, From Drafting, or From Design. Use Add Sheet when a job needs another stock size, material, thickness, or media. Select the stock dimensions, origin, media, and a matching Cut Chart for each sheet.

Place the parts by hand or use Auto-Nest. The padlock beside a part locks that placement and excludes it from toolpath generation. The two padlocks on the Sheets heading apply to every part across the job, including copies in collapsed groups. Undo restores the previous mix of locked and unlocked parts.

Generate and inspect the cut

Set leads and tabs in Parameters, then choose Generate. Open Simulation to check the order, pierce positions, cutting moves, and travel between cuts. Regenerate after you change the stock, chart, or placement. Choose Post Process to save the active sheet with the selected Mach3 or Mach4 post.

Estimate abrasive cost

After generating toolpaths, open Quote Job. For an abrasive sheet, enter your media price per pound or kilogram and record the measured abrasive flow in the Cut Chart. The estimate counts the time the abrasive command is on, including the applicable start delay and stationary pierce. Water Only uses no abrasive.