Learn/GcodePilot/Connection & firmware

LinuxCNC Milling

Updated v2.6.3

At a glance

  • Import an existing LinuxCNC folder into a portable machine profile
  • Edit INI and HAL files in Machine Parameters and inspect live HAL signals
  • Connect to the selected mill profile from GcodePilot
  • Manage tool numbers, height registers, and manual tool changes in Mill Tool Setup
  • Touch off tool height or set the active work Z and adjust the spindle from the toolbar

Prepare and connect

In Machines, select Import LinuxCNC Configuration Folder. Review the INI, HAL files, dependencies, and GcodePilot display adaptation. JetCad3 stores a portable copy of the configuration with the machine profile.

On an installed Appliance, open Machine Parameters and choose Prepare Local Runtime. Preparation leaves the controller stopped. For a physical mill, boot LinuxCNC Realtime, then use Connect in GcodePilot. The native simulator can run on Standard or Realtime. HAL Inspector in Machine Parameters shows the live components, pins, signals, and threads. Review saved configuration changes before restarting LinuxCNC to apply them.

Tools, Z and spindle speed

Open Mill Tool Setup from the toolbar or the DRO’s tool menu. Add numbered tools, edit their names and lengths, and assign a height register. A tool can use a different H number or cancel height compensation. The overlay shows the loaded tool and active height register. When LinuxCNC requests a manual tool change, GcodePilot waits for operator confirmation.

With no height offset active, Z Zero sets the active work offset’s Z. With a height offset active, it measures that tool height relative to the current work Z zero. Use Set Work Z from the Z tool dropdown to enter a work Z value with the active height offset applied. The Spindle toolbar tool controls direction and accepts a new RPM target while the spindle runs.